No. | 項目ITEMS | SKT15250A | SKT15320 | SKT15400 | SKT15500 | SKT15630 | SKT15800 | SKT15100 | |
1 | 工作臺臺面直徑Table diameter(mm) | Φ250 | Φ320 | Φ400 | Φ500 | Φ630 | Φ800 | Φ1000 | |
2 | 工作臺水平位置時臺高度 Table height(mm) | 290 | 340 | 420 | 526.5 | 600 | 760 | ||
3 | 工作臺傾斜軸線至底面高度 Titting axis height(mm) | 198 | 240 | 290 | 365 | 410 | 554 | ||
4 | 中心定位孔直徑Center bore diameter(mm) | Φ30H7 | Φ40H7 | Φ130H7 | Φ60H7 | Φ200H7 | Φ135H7 | Φ165H7 | |
5 | 工作臺T型槽寬度T-slot size(mm) | 14 | 14 | 14 | 18 | 18 | 18 | 18 | |
6 | 定位鍵寬度Locating key size(mm) | 18 | 18 | 18 | 22 | 22 | 22 | 22 | |
7 | 回轉蝸桿副傳動比Worm gear ratio | 1:90 | 1:90 | 1:120 | 1:120 | 1:120 | 1:120 | 1:120 | |
8 | 回轉總傳動比Total reduction ratio for rotating | 1:180 | |||||||
9 | 可傾軸蝸桿副傳動比Worm gear ratio for tilting | 1:90 | 1:90 | 1:120 | 1:90 | 1:90 | 1:120 | 1:120 | |
10 | 可傾總傳動比Total reduction ratio for tilting | 1:90 | 1:90 | 1:120 | 1:90 | 1:90 | 1:120 | 1:120 | |
11 | 工作臺最高轉速M(fèi)ax speed(r/mm) | 11.1 | 5.5 | ||||||
12 | 伺服電機(帶2000脈沖編碼器)Servo motor(optional) | 扭矩Torque(N.m) | ≥8 | ≥8 | ≥12 | ≥12 | ≥15 | ≥22 | ≥27 |
可匹配功率 Output pow(Kw) | ≥1.0 | ≥1.0 | ≥1.4 | ≥1.4 | ≥1.4 | ≥3.8 | ≥3.8 | ||
13 | 設定最小分度單位 Table graduation angle per pulse | 0.001° | |||||||
14 | 回轉軸傾斜范圍Tilting angle | 0~90° | 0~105° | 0~90° | |||||
15 | 回轉軸靜態鎖緊力矩 Max.torque of worm gear(N.m) | 油壓(Oil)15x105Pa | 1000 | 1800 | 2000 | 2800 | (35X105Pa)4000 | 6000 | 6000 |
氣壓(Air)5x105Pa | 300 | 500 | 650 | 800 | 1500 | 2000 | 2000 | ||
16 | 回轉軸 Rotating shalt | 分度精度 Dividing accuracy | ≤30° | ≤25° | ≤20° | ≤20° | ≤20° | ≤15° | ≤15° |
重復定位精度 Repeatability accuraacy | ≤6° | ≤6° | ≤6° | ≤6° | ≤4° | ≤4° | ≤4° | ||
17 | 承載load capacity | 水平Horizontal | 100 | 300 | 350 | 500 | 800 | 1500 | 2000 |
垂直Vertical | 50 | 100 | 175 | 300 | 400 | 650 | 800 |